Blue Sky Sky System One Sub 12

Blue Sky Sky System One Sub 12

Artikel Nr.: 22269

€ 854,90*
Menge:
plus

minus
Innerhalb von 24h versandfertig.
  • High End Subwoofer
  • 200 Watt RMS Leistung
  • Frequenzgang: 20 Hz * 200 Hz

SUB 12

The Blue Sky SUB 12 was specifically designed to complement the SAT 6.5 and SAT 6.5 MK II Satellite speakers. Featuring a cast aluminum frame, 12" forward-firing driver with 2" voice coil, the SUB 12 has a dedicated 200-watt amplifier with a frequency response of 30 Hz- 200 Hz +/* 3 dB (anechoic) and a typical response of 20Hz to 200Hz (3000 Cubic Foot Room). In addition, the SUB 12 has a built-in 2.1 bass management system with a 4th order, 80 Hz Linkwitz-Riley low-pass filter and 2nd order 80Hz high pass filter for the satellite. Rear panel functions include: Right/Left In and Out; SUB In and Out (for connecting multiple subwoofers); Mute and Phase switches; SUB Gain & Power LED; Power switch; and Slo-Blo Fuse. Measuring 18"H x 15"W x 20"D and weighing 62 lbs., the SUB 12 features MDF construction with four recessed 1/4" x 20 threaded inserts for either spiked or rubber feet.

The SUB 12 is also fully compatible with Blue Sky's I/ON, SAT 5 / SAT 5 MKII and SAT 12*. Additionally the SUB 12 is compatible with any THX pm3 approved nearfield monitor (visit http://www.thx.com for more information).

*NOTE: When the SUB 12 is used with the SAT 12, multiple SUB 12s should be used.

General Specifications - Sub 12

  • All measurements / specifications are measured using the SUB 12's direct input, which does not have a low pass filter.
  • Voltage Sensitivity: 90dB SPL @ 100mv @ 1M
  • (40 to 80Hz bandwidth limited)
  • Frequency Response (anechoic): 30 to 200Hz +/-3dB
  • Typical In-Room Response: 20 to 200Hz (3000 Cubic Feet)
  • Bass Management Section
  • Input Impedance: 20k Ohms balanced
  • Common Mode Rejection Ratio: 40dB typical @60Hz
  • Maximum Input Level (all inputs): +24dBu balanced
  • Maximum Output Level:+24dBu balanced
  • Output Impedance:200 Ohms balanced
  • Auto Mute Time Out: >15 Minutes
  • Mute Threshold (all inputs): 30mV
  • Left & Right Inputs to Sat Outputs
  • Gain (balanced in and out): 0dB
  • High-Pass Filter type: 2nd order Linkwitz-Riley
  • High-Pass Filter Cutoff: 80Hz
  • High-pass Filter Q: 0.707
  • THD + Noise: 0.002% @ 1kHz @ +4dBu
  • Left & Right Inputs to Sub Out
  • Gain: 0dB
  • Low-Pass Filter Type:4th order Linkwitz-Riley
  • Low-Pass Cutoff: 80Hz
  • Subwoofer Direct In to Direct Output
  • Gain: 0dB
  • Low-Pass Filter: None
  • Enclosure
  • Solid 3/4" MDF construction with 1"" MDF Front and Rear Baffle"
  • Viscoelastic energy absorbing front baffle coating
  • Flush mounted driver
  • Isolation feet are included. Inserts for optional attachment of spike feet.
  • Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and grill)
  • Weight 62lbs.
  • 12" Woofer
  • Long excursion design with cast aluminum frame.
  • 2" voice coil with vented motor for high power handling
  • Fully video shielded
  • Subwoofer Amplifier
  • Discrete symmetrical bipolar design with localized feedback
  • 200-W RMS into 4 Ohms
  • THD + Noise less than 0.015% at rated power @100Hz
  • Adjustable gain control